JCI 191C Controlled Humidity Test Chamber

Permits the test environment temperature and humidity to be conditioned to enable charge dissipation and capacitance loading capabilities of materials.

JCI Logo

191 Header

Including the JCI 192 Dry Air Supply



  • Easy to use, common sense controls
  • Allows preconditioning of samples prior to test with JCI 155v6
  • Relative humidity range 15% to 65%
  • Temperature range = Ambient ±10°C.


General Description

The JCI 191C is a regulated test chamber that provides, in conjunction with the JCI 155v6, the opportunity to measure the charge dissipation and capacitance loading capabilities of materials under defined humidity conditions with measurement of temperature and humidity. Relative humidity can be controlled and measured from 65% down to below 15%. Temperature can be controlled to ±10°C around ambient.

The JCI 192 (sold separately) is used in conjunction with the JCI 191C and provides it with a low pressure flow of very low humidity air via a push-in connector for 6mm airline plastic tube. This tube (typically 3m long) can be connected directly to the input push-in connector on the control box of the JCI 191C. The supply pressure is set to operate over an output pressure range between about 0.05 and 5 p.s.i. Tyically the air normally has a dewpoint of -35°C or less.


JCI 191 Main Pic.png


  • Chamber size:                            600 x 700 x 300mm (internal dimensions)
  • Relative humidity control:        From 15% to 65%
  • Accuracy:                                     ±3.5% RH for humidity & ±2.5°C for temperature at the extremities of the above                                                                                       measurements
  • Controls:                                       Push buttons to enable target humidity and temperature levels to be set with                                                                                           potentiometer
  • Dry air supply:                             Standard 6mm push-in plastic tube connector
                                                            Dry air supply 0.1SCFM
  • Power supply:                             Mains power is connected via an IEC connector on the                                                                                                                                   Control Box. Operation from 240V 5VA supplies. External supply should be fused 3A.

Compatible Instrument:

  • JCI 192 Dry Air Supply



Library items

JCI Electrostatic Instrumentation Brochure 2014

Our latest range of JCI electrostatic instruments and services for the consultancy, laboratory testing, hazard assessment, R&D and training sectors.

Download document

Practical Guide to Industrial Electrostatics - Hazards, Problems & Applications

The reason why electrostatic phenomena are so important can be set under three headings: hazards, problems and applications. This Guide will address each of these in turn and show why static often has a critical role to play across the whole breadth of industry.

Download document

Become a subscriber

Benefits to subscribing:

  • Access to our latest datasheets and publications
  • Exclusive publication downloads 
  • Latest news and regulatory information

Register Now